18631252388联系我们
名称：保定市清苑区鑫达模板加工厂
电话：0312-8100691
手机：18631252388
地址：河北省保定市清苑区阎庄乡工业区
新闻动态
盖板模具选材和防老化的方法
选材
Material selection
盖板模具的选材盖板模具采用聚丙烯（PP）为原料，其材料具有良好的可锻性、切削加工性、淬硬性及可磨削性等。盖板模具采用钣金钢为原料，其材料具有很好的可塑性、适硬性、加工型、超韧性等。
Polypropylene (PP) is used as raw material in the selection of cover die. The material has good malleability, cutting machinability, hardening and grindability. Sheet metal is used as the raw material of the cover die. Its material has good plasticity, hardness, processing type, super toughness and so on.
防老化的方法
Anti-aging methods
要想让模具使用的时间变长方法：一是避免盖板塑料模具受强光照射；二是避免腐烂变质的物品与盖板塑料模具集中存放；三是生产过程中对模具进行范围的控制；四是控制人为破坏，严格按照生产规定及生产要求进行合理的生产。
In order to make the use of the mould longer, the following methods should be adopted: first, to avoid the plastic mould of the cover plate being irradiated by strong light; second, to avoid the centralized storage of decaying and deteriorating articles and the plastic mould of the cover plate; third, to control the scope of the mould in the production process; fourth, to control the artificial damage and to make it reasonable in strict accordance with the production regulations and production requirements. Production.
Material selection
盖板模具的选材盖板模具采用聚丙烯（PP）为原料，其材料具有良好的可锻性、切削加工性、淬硬性及可磨削性等。盖板模具采用钣金钢为原料，其材料具有很好的可塑性、适硬性、加工型、超韧性等。
Polypropylene (PP) is used as raw material in the selection of cover die. The material has good malleability, cutting machinability, hardening and grindability. Sheet metal is used as the raw material of the cover die. Its material has good plasticity, hardness, processing type, super toughness and so on.
防老化的方法
Anti-aging methods
要想让模具使用的时间变长方法：一是避免盖板塑料模具受强光照射；二是避免腐烂变质的物品与盖板塑料模具集中存放；三是生产过程中对模具进行范围的控制；四是控制人为破坏，严格按照生产规定及生产要求进行合理的生产。
In order to make the use of the mould longer, the following methods should be adopted: first, to avoid the plastic mould of the cover plate being irradiated by strong light; second, to avoid the centralized storage of decaying and deteriorating articles and the plastic mould of the cover plate; third, to control the scope of the mould in the production process; fourth, to control the artificial damage and to make it reasonable in strict accordance with the production regulations and production requirements. Production.
